HPE FlexNetwork 5510 HI Series Mpls Configuration Guide

195
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2.
Enter BGP VPNv4 address
family view or BGP-VPN
VPNv4 address family view.
• Enter BGP VPNv4 address
family view:
a. bgp as-number
b. address-family vpnv4
• Enter BGP-
VPN VPNv4
address family view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
c. address-family vpnv4
N/A
3.
Enable logging for BGP route
flapping.
log-route-flap
monitor-time
monitor-count [ log-count-limit |
route-policy
route-policy-name ] *
By default, logging for BGP
route flapping is disabled.
Displaying and maintaining MPLS L3VPN
You can soft-reset or reset BGP sessions to apply new BGP configurations. A soft reset operation
updates BGP routing information without tearing down BGP connections. A reset operation updates
BGP routing information by tearing down, and then re-establishing BGP connections. Soft reset
requires that BGP peers have route refresh capability.
Execute the following commands in user view to soft reset or reset BGP connections:
Task
Command
Soft reset BGP sessions for
VPNv4 address family.
refresh bgp
{ ip-address [ mask-length ] |
all
|
external
|
group
group-name |
internal
} {
export
|
import
}
vpnv4
[
vpn-instance
vpn-instance-name ]
Reset BGP sessions for VPNv4
address family.
reset bgp
{ as-number | ip-address [ mask-length ] |
all
|
external
|
internal
|
group
group-name }
vpnv4
[
vpn-instance
vpn-instance-name ]
For more information about the refresh bgp vpnv4 and reset bgp vpnv4 commands, see Layer
3—IP Routing Command Reference.
Execute the following commands in any view to display MPLS L3VPN:
Task
Command
Display the
routing table for a
VPN instance.
display ip routing-table vpn-instance
vpn-instance-name [
statistics
|
verbose
] [
standby slot
slot-number ]
Display information about a
specified or all VPN instances.
display ip vpn-instance
[
instance-name
vpn-instance-name ]
Display the FIB of a VPN
instance.
display fib vpn-instance
vpn-instance-name
Display FIB entries that match the
specified destination IP address
in the specified VPN instance.
display fib vpn-instance
vpn-instance-name ip-address [ mask |
mask-length ]
Display BGP VPNv4 peer group
information.
display bgp group vpnv4
[
vpn-instance
vpn-instance-name ]
[
group-name
group-name ]

HPE FlexNetwork 5510 HI Series Specifications

General

Model	HPE FlexNetwork 5510 HI Series
Category	Switch
Switch Type	Managed
Fans	Redundant fans
Layer	Layer 3
IPv6 Support	Yes
Warranty	Limited lifetime warranty
Power over Ethernet (PoE)	Available on some models (PoE+)
MAC Address Table Size	32, 000 entries
Routing Protocol	RIP, OSPF, BGP, IS-IS, Static Routing
Management	CLI, Web, SNMP
Operating Temperature	0°C to 45°C
Dimensions	440 x 400 x 44 mm
Input Voltage	100-240 VAC, 50/60 Hz
Memory and Processor	1 GB RAM, 1 GHz CPU
Operating Humidity	5% to 95% (non-condensing)
Security Features	ACL, 802.1X, RADIUS, TACACS+, SSH, SSL