368
• Specify whether to switch traffic from the backup PW to the primary PW when the primary PW
recovers, and the wait time for the switchover.
• Perform a manual PW switchover.
Configuring static PW redundancy
1. Enter system view.
N/A
2. Enter VSI view.
vsi
vsi-name
N/A
3.
Specify static signaling for
PWs, and enter VSI static
view.
pwsignaling
static
By default, no PW signaling
protocol is specified for the VSI.
4. (Optional.) Specify whether
to switch traffic from the
backup PW to the primary
PW when the primary PW
recovers, and the wait time
for the switchover.
revertive
{
wtr
wtr-time |
never
}
By default, when the primary PW
recovers, traffic is immediately
switched back from the backup
PW to the primary PW.
5.
Configure a static PW and
enter VSI static PW view.
peer
ip-address [
pw-id
pw-id ]
[
in-label
label-value
out-label
label-value ] [
no-split-horizon
|
pw-class
class-name |
tunnel-policy
tunnel-policy-name ]
*
By default, no
configured.
6. Configure a backup static PW
and enter VSI static backup
PW view.
backup-peer
ip-address [
pw-id
pw-id ]
in-label
label-value
out-label
label-value [
pw-class
class-name |
tunnel-policy
tunnel-policy-name ] *
By default, no backup static PW
is configured.
If you have configured a default
PW ID for the VSI with the
default-pw-id
command, you
can use the default PW ID
without providing a PW ID in the
backup-peer
default PW ID is configured, you
must provide a PW ID in the
backup-peer
command.
7. Return to user view.
N/A
8. Manually switch traffic of the
specified PW to its backup
PW.
l2vpn switchover peer
ip-address
pw-id
pw-id
N/A
Configuring LDP PW redundancy
1. Enter system view.
N/A
2. Enter VSI view.
vsi
vsi-name
N/A
3.
Specify LDP signaling for
PWs, and enter VSI LDP
signaling view.
pwsignaling
ldp
By default, no PW signaling
protocol is specified for the VSI.
4.
(Optional.) Specify whether
to switch traffic from the
backup PW to the primary
revertive
{
wtr
wtr-time |
never
}
By default, when the primary PW
recovers, traffic is immediately
switched back from the backup
To Next Page
Loading...
Need help?
General