HPE FlexNetwork 5510 HI Series Mpls Configuration Guide

370
Task
Command
[
verbose
]
Display VSI information.
display l2vpn vsi
[
name
vsi-name ] [
verbose
]
Display information about automatically
discovered VPLS PEs.
display l2vpn auto-discovery
[
peer
ip-address ] [
vsi
vsi-name ]
Display VPLS label block information.
display l2vpn bgp
[
peer
ip-address |
local
] [
vsi
vsi-name ] [
verbose
]
Display BGP L2VPN peer group information.
display bgp group l2vpn
[
group-name
group-name ]
Display VPLS PE information maintained by
BGP.
display bgp l2vpn auto-discovery
[
peer
ip-address
{
advertised
|
received
} [
statistics
] |
route-distinguisher
route-distinguisher [
pe-address
ip-address
[
advertise-info
] ] |
statistics
]
Display VPLS label block information
maintained by BGP.
display bgp l2vpn signaling
[
peer
ip-address
{
advertised
|
received
} [
statistics
] |
route-distinguisher
route-distinguisher [
site-id
site-id [
label-offset
label-offset
[
advertise-info
] ] ] |
statistics
]
Display BGP L2VPN peer information.
display bgp peer l2vpn
[ ip-address mask-length |
{ ip-address |
group-name
group-name }
log-info
|
[ [ ip-address ]
verbose
] [
standby slot
slot-number ] ]
Display BGP L2VPN update group
information.
display bgp update-group l2vpn
[ ip-address ]
Clear MAC address
entries for one or all
VSIs.
reset l2vpn mac-address
[
vsi
vsi-name ]
Reset L2VPN BGP sessions.
reset bgp
{ as-number | ip-address [ mask-length ] |
all
|
external
|
group
group-name |
internal
}
l2vpn
For more information about the display bgp group l2vpn, display bgp peer l2vpn, display bgp
update-group l2vpn, and reset bgp commands, see Layer 3—IP Routing Command Reference.
VPLS configuration examples
Static PW configuration example
Network requirements
Configure VPLS on each PE, and establish static PWs between the PEs to interconnect the CEs.

HPE FlexNetwork 5510 HI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5510 HI Series
Category	Switch
Language	English