390
MTU : 1500
PW Attributes : Main
VCCV CC : -
VCCV BFD : -
Tunnel Group ID : 0x1800000660000000
Tunnel NHLFE IDs : 131
Peer: 4.4.4.9 PW ID: 500
Signaling Protocol : LDP
Link ID : 9 PW State : Up
In Label : 131177 Out Label: 131177
MTU : 1500
PW Attributes : Main
VCCV CC : -
VCCV BFD : -
Tunnel Group ID : 0x1800000670000000
Tunnel NHLFE IDs : 132
[NPE3] display l2vpn pw verbose
VSI Name: aaa
Peer: 2.2.2.9 PW ID: 500
Signaling Protocol : LDP
Link ID : 8 PW State : Up
In Label : 131179 Out Label: 131178
MTU : 1500
PW Attributes : Main
VCCV CC : -
VCCV BFD : -
Tunnel Group ID : 0x1800000660000000
Tunnel NHLFE IDs : 131
Peer: 3.3.3.9 PW ID: 500
Signaling Protocol : LDP
Link ID : 9 PW State : Up
In Label : 131177 Out Label: 131177
MTU : 1500
PW Attributes : Main
VCCV CC : -
VCCV BFD : -
Tunnel Group ID : 0x1800000670000000
Tunnel NHLFE IDs : 132
H-VPLS UPE dual homing configuration example
Network requirements
To improve reliability of the H-VPLS network, UPE establishes a U-PW with NPE 1 and NPE 2,
respectively. The U-PW between UPE and NPE 1 is the primary PW and that between UPE and NPE
2 is the backup PW. The backup PW works only when the primary PW fails.
The H-VPLS uses LDP as the PW signaling protocol.
To Next Page
Loading...
Need help?
General