394
Verifying the configuration
# Execute the display l2vpn pw verbose command on each PE. The output shows that PWs in up
state have been established.
[UPE] display l2vpn pw verbose
VSI Name: aaa
Peer: 2.2.2.2 PW ID: 500
Signaling Protocol : LDP
Link ID : 8 PW State : Up
In Label : 131151 Out Label: 131279
Wait to Restore Time: 0 sec
MTU : 1500
PW Attributes : Main
VCCV CC : -
VCCV BFD : -
Tunnel Group ID : 0x1800000260000002
Tunnel NHLFE IDs : 137
Peer: 3.3.3.3 PW ID: 500
Signaling Protocol : LDP
Link ID : 8 PW State : Blocked
In Label : 131150 Out Label: 131279
MTU : 1500
PW Attributes : Backup
VCCV CC : -
VCCV BFD : -
Tunnel Group ID : 0x1800000360000003
Tunnel NHLFE IDs : 135
[NPE1] display l2vpn pw verbose
VSI Name: aaa
Peer: 1.1.1.1 PW ID: 500
Signaling Protocol : LDP
Link ID : 8 PW State : Up
In Label : 131279 Out Label: 131151
MTU : 1500
PW Attributes : Main, No-split-horizon
VCCV CC : -
VCCV BFD : -
Tunnel Group ID : 0x180000060000000
Tunnel NHLFE IDs : 136
Peer: 3.3.3.3 PW ID: 500
Signaling Protocol : LDP
Link ID : 9 PW State : Up
In Label : 131280 Out Label: 131290
MTU : 1500
PW Attributes : Main
VCCV CC : -
VCCV BFD : -
Tunnel Group ID : 0x1800000160000005
Tunnel NHLFE IDs : 137
To Next Page
Loading...
Need help?
General