EasyManua.ls Logo

HPE FlexNetwork MSR Series - Page 205

HPE FlexNetwork MSR Series
547 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
192
IPsec policy name: "btoa"
sequence number: 1
acl version: None
mode: tunnel
-----------------------------
PFS: N, DH group: none
tunnel:
local address: 1.1.1.1
remote address: 1.1.1.2
flow :
sour addr: 0.0.0.0/0.0.0.0 port: 0 protocol: IP
dest addr: 0.0.0.0/0.0.0.0 port: 0 protocol: IP
[inbound ESP SAs]
spi: 0x75B6EF44(1974923076)
transform: ESP-ENCRYPT-DES ESP-AUTH-MD5
in use setting: Tunnel
connection id: 1
sa duration (kilobytes/sec): 1843200/3600
sa remaining duration (kilobytes/sec): 1843199/3503
anti-replay detection: Enabled
anti-replay window size(counter based): 32
udp encapsulation used for nat traversal: N
[outbound ESP SAs]
spi: 0x8CF16C54(2364632148)
transform: ESP-ENCRYPT-DES ESP-AUTH-MD5
in use setting: Tunnel
connection id: 2
sa duration (kilobytes/sec): 1843200/3600
sa remaining duration (kilobytes/sec): 1843199/3503
anti-replay detection: Enabled
anti-replay window size(counter based) : 32
udp encapsulation used for nat traversal: N
# On Router B, ping the IP address of the interface on Router A that connects to the branch.
[RouterB] ping -a 192.168.1.1 172.17.17.1
PING 172.17.17.1: 56 data bytes, press CTRL_C to break
Reply from 172.17.17.1: bytes=56 Sequence=1 ttl=255 time=15 ms
Reply from 172.17.17.1: bytes=56 Sequence=2 ttl=255 time=10 ms
Reply from 172.17.17.1: bytes=56 Sequence=3 ttl=255 time=10 ms
Reply from 172.17.17.1: bytes=56 Sequence=4 ttl=255 time=5 ms
Reply from 172.17.17.1: bytes=56 Sequence=5 ttl=255 time=4 ms
--- 172.17.17.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 4/8/15 ms

Table of Contents

Other manuals for HPE FlexNetwork MSR Series

Related product manuals