EasyManuals Logo

HPE FlexNetwork MSR Series Comware 5 Security Configuration Guide

HPE FlexNetwork MSR Series
547 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #252 background imageLoading...
Page #252 background image
239
Lifetime : 86400 seconds
DPD : disable
# Display the IKEv2 SA established by the IKE_SA_INIT exchange.
[RouterA] display ikev2 sa
total SAs: 1
connection-id peer flag
------------------------------------------------------------------------
14 2.2.2.2 RD|ST
flag meaning
RD--READY ST--STAYALIVE FD--FADING TO—TIMEOUT
# Display the IPsec SAs established by the IKE_AUTH exchange.
[RouterA] display ipsec sa
===============================
Interface: Ethernet1/1
path MTU: 1500
===============================
-----------------------------
IPsec policy name: "map"
sequence number: 1
acl version: ACL4
mode: isakmp
-----------------------------
PFS: N, DH group: none
tunnel:
local address: 1.1.1.1
remote address: 2.2.2.2
flow:
sour addr: 10.1.1.0/255.255.255.0 port: 0 protocol: IP
dest addr: 10.1.2.0/255.255.255.0 port: 0 protocol: IP
[inbound ESP SAs]
spi: 110534512 (0x6969f70)
transform: ESP-ENCRYPT-DES ESP-AUTH-SHA1
in use setting: Tunnel
connection id: 1
sa duration (kilobytes/sec): 1843200/3600
sa remaining duration (kilobytes/sec): 1843199/965
anti-replay detection: Enabled
anti-replay window size(counter based): 32
udp encapsulation used for nat traversal: N
communication entity: Responder
status: --
[outbound ESP SAs]

Table of Contents

Other manuals for HPE FlexNetwork MSR Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HPE FlexNetwork MSR Series and is the answer not in the manual?

HPE FlexNetwork MSR Series Specifications

General IconGeneral
BrandHPE
ModelFlexNetwork MSR Series
CategoryNetwork Router
LanguageEnglish

Related product manuals