To Next Page

To Previous Page

319

• Make sure the IP address of the portal device added on the portal server is the IP address of the

interface connecting users (20.20.20.1 in this example), and the IP address group associated

with the portal device is the network segment where the users reside (8.8.8.0/24 in this

example).

Configuration procedure

1. Configure a RADIUS scheme:

# Create a RADIUS scheme named rs1 and enter its view.

<RouterA> system-view

[RouterA] radius scheme rs1

# Set the server type for the RADIUS scheme. When using the CAMS or IMC server, set the

server type to extended.

[RouterA-radius-rs1] server-type extended

# Specify the primary authentication server and primary accounting server, and configure the

keys for communication with the servers.

[RouterA-radius-rs1] primary authentication 192.168.0.112

[RouterA-radius-rs1] primary accounting 192.168.0.112

[RouterA-radius-rs1] key authentication simple radius

[RouterA-radius-rs1] key accounting simple radius

# Specify that the ISP domain name should not be included in the username sent to the

RADIUS server.

[RouterA-radius-rs1] user-name-format without-domain

[RouterA-radius-rs1] quit

2. Configure an authentication domain:

# Create an ISP domain named dm1 and enter its view.

[RouterA] domain dm1

# Configure AAA methods for the ISP domain.

[RouterA-isp-dm1] authentication portal radius-scheme rs1

[RouterA-isp-dm1] authorization portal radius-scheme rs1

[RouterA-isp-dm1] accounting portal radius-scheme rs1

[RouterA-isp-dm1] quit

# Configure domain dm1 as the default ISP domain for all users. Then, if a user enters a

username without any ISP domain at logon, the authentication and accounting methods of the

default domain are used for the user.

[RouterA] domain default enable dm1

3. Configure portal authentication:

# Configure the portal server as follows:

{ Name: newpt

{ IP address: 192.168.0.111

{ Key: portal

{ Port number: 50100

{ URL: http://192.168.0.111:8080/portal

[RouterA] portal server newpt ip 192.168.0.111 key portal port 50100 url

http://192.168.0.111:8080/portal

# Enable Layer 3 portal authentication on the interface connecting Router B.

[RouterA] interface ethernet 1/2

[RouterA–Ethernet1/2] portal server newpt method layer3

[RouterA–Ethernet1/2] quit

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English

HPE FlexNetwork MSR Series Comware 5 Security Configuration Guide

Table of Contents

Other manuals for HPE FlexNetwork MSR Series

Questions and Answers:

HPE FlexNetwork MSR Series Specifications

Related product manuals