HPE FlexNetwork MSR Series Comware 5 Security Configuration Guide

66
A username configured on the RADIUS server is in the format $enablevel$, where level
specifies the privilege level to which the user wants to switch.
Figure 21 Configuring a username for privilege level switching (take $enab1$ for
example)
Figure 22 List of the usernames for privilege level switching
Verifying the configuration
After the configuration is complete, the user can Telnet to the router and use username test@bbb
and password aabbcc to enter the user interface of the router, and access all level 0 commands.
<Router> telnet 192.168.1.70
Trying 192.168.1.70 ...
Press CTRL+K to abort
Connected to 192.168.1.70 ...
******************************************************************************

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English