Huawei quidway s7700 - Configuring a Principal VLAN for a MUX VLAN

MUX
VLAN
VLAN
Type
Port Type Communication Rights
Subordinate
VLAN
Separate
VLAN
Separate port A separate port can only communicate with
principal ports.
Each separate VLAN must be associated with
a principal VLAN.
Group
VLAN
Group port A group port can communicate with both
principal ports and other group ports in the
same group VLAN but cannot communicate
with group ports in other group VLANs or
separate ports.
Each group VLAN must be associated with a
principal VLAN.
Pre-configuration Tasks
Before configuring a MUX VLAN, complete the following task:
l Creating VLANs
Data Preparation
To configure a MUX VLAN, you need the following data.
No.
Data
1 ID of each principal VLAN and number of each port belonging to the principal VLAN
2 ID of each group VLAN and number of each port belonging to the group VLAN
3 ID of each separate VLAN and number of each port belonging to the separate VLAN
3.7.2 Configuring a Principal VLAN for a MUX VLAN
Ports added to a principal VLAN can communicate with every port in the MUX VLAN.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
A VLAN is created, and the VLAN view is displayed. If the specified VLAN has been created,
the VLAN view is directly displayed.
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 3 VLAN Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
102