Huawei quidway s7700 - Checking the Configuration; Configuring MSTP Interoperability between Huawei Devices and Non-Huawei Devices; Establishing the Configuration Task

The system view is displayed.
Step 2 Run:
stp process process-id
The MSTP process view is displayed.
Step 3 Run:
stp link-share-protection
Share-link protection is enabled.
----End
9.5.7 Checking the Configuration
After MSTP protection functions are configured, check whether the configurations take effect.
Prerequisite
All configurations of MSTP protection functions are complete.
Procedure
l Run the display stp [ instance instance-id ] [ interface { interface-type interface-
number } ] [ brief ] command to view spanning-tree status and statistics.
----End
9.6 Configuring MSTP Interoperability Between Huawei
Devices and Non-Huawei Devices
To enable Huawei devices to interwork with non-Huawei devices, configure proper parameters
and functions, including the BPDU format, MSTP protocol packet format, and digest snooping
function, on the Huawei devices running MSTP.
9.6.1 Establishing the Configuration Task
Before configuring MSTP interoperability between Huawei devices and non-Huawei devices,
familiarize yourself with the applicable environment, complete the pre-configuration tasks, and
obtain the data required for the configuration. This will help you complete the configuration task
quickly and accurately.
Applicable Environment
On an MSTP network, inconsistent protocol packet formats and BPDU keys may lead to a
communication failure. Configuring proper MSTP parameters on Huawei devices ensures
interoperability between Huawei devices and non-Huawei devices.
Pre-configuration Tasks
Before configuring MSTP interoperability between Huawei devices and non-Huawei devices,
complete the following task:
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 9 MSTP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
454