Huawei quidway s7700 - Enabling the MUX VLAN Function on a Port

Do as follows on a switching device that requires a separate VLAN:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
The view of a created principal VLAN is displayed.
Step 3 Run:
subordinate separate vlan-id
A separate VLAN is configured for a subordinate VLAN.
Group VLANs and separate VLANs in one MUX VLAN cannot use the same VLAN ID.
----End
3.7.5 Enabling the MUX VLAN Function on a Port
After the MUX VLAN function is enabled on a port, the principal VLAN and subordinate VLAN
can communicate with each other; ports in a group VLAN can communicate with each other;
ports in a separate VLAN cannot communicate with each other.
Context
Before the MUX VLAN function is enabled on a port, ensure that:
l The port has been added to only one ordinary VLAN. If the port has been added to multiple
VLANs, the MUX VLAN function cannot be enabled on this port.
l The port has been added to a principal or subordinate VLAN.
Do as follows on the switching device on which a port needs to be enabled with the MUX VLAN
function:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The view of an Ethernet port connecting users is displayed.
Step 3 Run:
port mux-vlan enable
The MUX VLAN function is enabled.
The interface has been added only to a principal VLAN or a subordinate VLAN.
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 3 VLAN Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
104