Huawei quidway s7700 - Specifying the Outer VLAN ID; Checking the Configuration; Configuring Selective Qinq; Establishing the Configuration Task

5.3.3 Specifying the Outer VLAN ID
Context
Do as follows on the S7700 to be configured with interface QinQ.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
The VLAN is created.
Step 3 Run:
quit
Return to the system view.
Step 4 Run:
interface interface-type interface-number
The interface view is displayed.
Step 5 Run:
port default vlan vlan-id
The VLAN ID (default VLAN) of the outer VLAN tag is set.
----End
5.3.4 Checking the Configuration
Procedure
l Run the display current-configuration interface interface-type interface-number
command to display the QinQ configuration on the interface.
----End
5.4 Configuring Selective QinQ
This section describes how to configure the interface type, the outer VLAN ID, and selective
QinQ.
5.4.1 Establishing the Configuration Task
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 5 QinQ Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
192