Huawei quidway s7700 - Example for Configuring N:1 VLAN Mapping

#
interface GigabitEthernet3/0/1
port link-type trunk
port trunk allow-pass vlan 5
#
interface GigabitEthernet3/0/2
port link-type trunk
port trunk allow-pass vlan 5
#
return
l Configuration file of SwitchC
#
sysname SwitchC
#
vlan batch 10
#
interface GigabitEthernet1/0/1
port link-type trunk
port trunk allow-pass vlan 10
#
return
l Configuration file of SwitchD
#
sysname SwitchD
#
vlan batch 10
#
interface GigabitEthernet1/0/1
port link-type trunk
port trunk allow-pass vlan 10
#
return
4.7.2 Example for Configuring N:1 VLAN Mapping
Networking Requirements
As shown in Figure 4-2, users in VLAN 100 to VLAN 200 connect to the Internet through the
aggregate switch of the carrier, that is, the Switch.
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 4 VLAN Mapping Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
178