Huawei quidway s7700 - Example for Configuring IP Subnet-Based VLAN Assignment

<Quidway> system-view
[Quidway] vlan batch 10 100
# Set the PVID of interfaces and add interfaces to the VLANs.
[Quidway] interface gigabitethernet 1/0/1
[Quidway-GigabitEthernet1/0/1] port hybrid pvid vlan 100
[Quidway-GigabitEthernet1/0/1] port hybrid untagged vlan 10
[Quidway-GigabitEthernet1/0/1] quit
[Quidway] interface gigabitethernet 1/0/2
[Quidway-GigabitEthernet1/0/2] port hybrid tagged vlan 10
[Quidway-GigabitEthernet1/0/2] quit
# Associate MAC addresses of PC1, PC2, and PC3 with VLAN 10.
[Quidway] vlan 10
[Quidway-Vlan10] mac-vlan mac-address 22-22-22
[Quidway-Vlan10] mac-vlan mac-address 33-33-33
[Quidway-Vlan10] mac-vlan mac-address 44-44-44
[Quidway-Vlan10] quit
# Enable MAC address-based VLAN assignment on GE1/0/1.
[Quidway] interface gigabitethernet 1/0/1
[Quidway-GigabitEthernet1/0/1] mac-vlan enable
[Quidway-GigabitEthernet1/0/1] quit
Step 2 Verify the configuration.
PC1, PC2, and PC3 can access the intranet, whereas PCs of non-employees cannot access the
intranet.
----End
Configuration Files
Configuration file of the Switch
#
sysname Quidway
#
vlan batch 10 100
#
vlan 10
mac-vlan mac-address 0022-0022-0022
mac-vlan mac-address 0033-0033-0033
mac-vlan mac-address 0044-0044-0044
#
interface GigabitEthernet1/0/1
port hybrid pvid vlan 100
port hybrid untagged vlan 10
mac-vlan enable
#
interface GigabitEthernet1/0/2
port hybrid tagged vlan 10
#
return
3.12.3 Example for Configuring IP Subnet-based VLAN
Assignment
After a LAN is divided into VLANs based on IP subnets, frames from a certain network segment
or IP address are transmitted in a specified VLAN. This reduces the configuration workload of
network administrators and facilitates management.
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 3 VLAN Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
122