Huawei quidway s7700 - Checking the Configuration; Maintaining MSTP; Clearing MSTP Statistics; Configuration Examples

9.6.5 Checking the Configuration
After MSTP parameters are configured for the interoperability between Huawei devices and
non-Huawei devices, check whether the configurations take effect.
Prerequisite
All the configurations for the interoperability between Huawei devices and non-Huawei devices
are complete.
Procedure
l Run the display stp [ instance instance-id ] [ interface { interface-type interface-
number } ] [ brief ] command to view spanning-tree status and statistics.
----End
9.7 Maintaining MSTP
MSTP maintenance includes resetting MSTP statistics.
9.7.1 Clearing MSTP Statistics
You can run the reset commands to reset MSTP statistics to 0.
Context
CAUTION
MSTP statistics cannot be restored after you clear them. Therefore, exercise caution when using
the reset commands.
After you confirm that MSTP statistics need to be cleared, run the following command in the
user view.
Procedure
Step 1 Run the reset stp [ interface interface-type interface-number ] statistics command to clear
spanning-tree statistics.
----End
9.8 Configuration Examples
This section provides a configuration example of MSTP.
9.8.1 Example for Configuring Basic MSTP Functions
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 9 MSTP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
458