-----------------------------------------------------------
GigabitEthernet1/0/1 Auto Security Disable
----End
Configuration Files
Configuration file of the Switch
#
sysname Quidway
#
vlan batch 2 6
#
voice-vlan aging-time 100
#
voice-vlan mac-address 0011-2200-0000 mask ffff-ff00-0000
#
interface GigabitEthernet1/0/1
port hybrid pvid vlan 6
port hybrid untagged vlan 6
voice-vlan 2 enable
#
return
3.12.13 Example for Configuring a Voice VLAN in Manual Mode
In manual voice VLAN mode, an interface must be added to the voice VLAN manually after
the voice VLAN function is enabled on the interface. The interface connected to a voice device
can forward voice data packets only after the interface is added to the voice VLAN manually.
Networking Requirements
Data flows of the HSI, VoIP, and IPTV services are transmitted on a network. Users require
high quality of VoIP services; therefore, voice data flows must be transmitted with a high priority
to ensure the call quality.
As shown in Figure 3-22, after a voice VLAN is configured on the Switch, the Switch checks
whether a data flow received by GigabitEthernet1/0/1 is a voice data flow based on the source
MAC address of the data flow. If the data flow is a voice data flow, the Switch changes the
priority of the flow and transmits it in the voice VLAN. If not, the Switch transmits the flow in
a common VLAN without changing the priority of the flow. GigabitEthernet1/0/1 needs to be
added to or deleted from the voice VLAN manually.
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 3 VLAN Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
150
To Next Page
Loading...
