Huawei quidway s7700 - Checking the Configuration; Maintaining VLAN; Clearing the Statistics of VLAN Packets

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
The VLAN view is displayed.
Step 3 Run:
protocol-transparent
VLAN transparent transport is enabled.
By default, VLAN transparent transport is disabled.
----End
3.10.3 Checking the Configuration
After configuring VLAN transparent transport, run the display this command in the VLAN view
to verify that VLAN transparent transport has taken effect.
Prerequisite
The VLAN transparent transport configurations are complete.
Procedure
l Run the display this command in the VLAN view to check the configuration for VLAN
transparent transport.
----End
3.11 Maintaining VLAN
A command of clearing statistics helps to locate the faults in a VLAN.
3.11.1 Clearing the Statistics of VLAN Packets
Before collecting traffic statistics in a specified time period on an interface, you need to reset
the original statistics on the interface.
Context
CAUTION
Statistics about VLAN packets cannot be restored after you clear it. So, confirm the action before
you use the command.
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 3 VLAN Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
117