Huawei quidway s7700 - Enabling HVRP Globally; Enabling HVRP on an Interface

12.3.2 Enabling HVRP Globally
Context
Do as follows on the S7700 where HVRP needs to be enabled globally.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
hvrp enable
HVRP is enabled globally.
By default, HVRP is disabled globally.
----End
12.3.3 Enabling HVRP on an Interface
Context
Do as follows on the S7700 where HVRP needs to be enabled on an interface.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
port link-type trunk
The link type of the interface is set to trunk.
Step 4 Run:
hvrp enable
HVRP is enabled on the interface.
By default, HVRP is disabled on an interface.
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 12 HVRP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
617