Huawei quidway s7700 - Page 196

Figure 4-2 Networking diagram for configuring N:1 VLAN mapping
GE1/0/0
Switch
…… ……
SwitchA
SwitchE
VLAN100~200
……
SwitchDSwitchCSwitchB
Internet
Configuration Roadmap
The configuration roadmap is as follows:
1. Configure the VLANs before and after mapping.
2. Add GE 1/0/0 of the Switch to the VLANs before and after mapping in tagged mode.
3. Configure VLAN mapping on GE 1/0/0 of the Switch.
Data preparation
To complete the configuration, you need the following data:
l VLANs before mapping: VLAN 100 to VLAN 200
l VLAN after mapping: VLAN 10
Procedure
Step 1 Configure the Switch.
# Create VLANs.
<Quidway> system-view
[Quidway] vlan batch 10 100 to 200
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 4 VLAN Mapping Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
179