Huawei quidway s7700 - Page 203

<SwitchB> system-view
[SwitchB] interface GigabitEthernet 1/0/2
[SwitchB-GigabitEthernet1/0/2] traffic-policy name1 inbound
[SwitchB-GigabitEthernet1/0/2] traffic-policy name2 outbound
Step 5 Verify the configuration.
The hosts in Enterprise A and the hosts in Enterprise B can communicate with each other.
----End
Configuration Files
l Configuration file of SwitchA
#
sysname SwitchA
#
vlan batch 100
#
traffic classifier name1 operator and precedence 5
if-match 1 vlan-id 300
if-match 2 cvlan-id 30
traffic classifier name2 operator and precedence 10
if-match 1 vlan-id 100
if-match 2 cvlan-id 10
#
traffic behavior name1
remark vlan-id 100
remark cvlan-id 10
traffic behavior name2
remark vlan-id 300
remark cvlan-id 30
#
traffic policy name1
classifier name1 behavior name1
traffic policy name2
classifier name2 behavior name2
#
interface GigabitEthernet1/0/1
port link-type trunk
port trunk allow-pass vlan 100
traffic-policy name1 inbound
traffic-policy name2 outbound
#
return
l Configuration file of SwitchB
#
sysname SwitchB
#
vlan batch 200
#
traffic classifier name1 operator and precedence 5
if-match 1 vlan-id 300
if-match 2 cvlan-id 30
traffic classifier name2 operator and precedence 10
if-match 1 vlan-id 200
if-match 2 cvlan-id 20
#
traffic behavior name1
remark vlan-id 200
remark cvlan-id 20
traffic behavior name2
remark vlan-id 300
remark cvlan-id 30
#
traffic policy name1
classifier name1 behavior name1
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 4 VLAN Mapping Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
186