This section describes how to connect sub-interfaces of a PE to a VPLS network so that CEs
can communicate with each other.
5.11 Configuring a Sub-interface to Access an L3VPN
This section describes how to configure a sub-interface to access an L3VPN on the PE so that
user networks between the CEs can communicate with each other.
5.12 Configuration Examples
This section provides several configuration examples of QinQ.
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 5 QinQ Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
189
To Next Page
Loading...
