EasyManua.ls Logo

Huawei quidway s7700 - Page 252

Huawei quidway s7700
648 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
[PE2-GigabitEthernet2/0/0.1] mpls l2vc 1.1.1.9 101
[PE2-GigabitEthernet2/0/0.1] quit
Step 6 Verify the configuration.
On PEs, check the L2VPN connections. You can see that an L2VC connection is set up and is
in Up state.
Take the display on PE1 as an example:
<PE1> display mpls l2vc interface gigabitethernet 1/0/0.1
*client interface : gigabitethernet 1/0/0.1 is up
session state : up
AC state : up
VC state : up
VC ID : 101
VC type : VLAN
destination : 3.3.3.9
local group ID : 0 remote group ID : 0
local VC label : 21504 remote VC label : 21504
local AC OAM State : up
local PSN State : up
local forwarding state : forwarding
BFD for PW : unavailable
manual fault : not set
active state : active
forwarding entry : not exist
link state : up
local VC MTU : 1500 remote VC MTU : 1500
local VCCV : Disable
remote VCCV : none
local control word : disable remote control word : none
tunnel policy name : --
traffic behavior name : --
PW template name : --
primary or secondary : primary
VC tunnel/token info : 1 tunnels/tokens
NO.0 TNL type : lsp , TNL ID : 0x10007
create time : 0 days, 0 hours, 4 minutes, 19 seconds
up time : 0 days, 0 hours, 3 minutes, 45 seconds
last change time : 0 days, 0 hours, 3 minutes, 45 seconds
CE1 and CE2 can ping each other successfully.
Take the display on CE1 as an example:
<CE1> ping 100.1.1.2
PING 100.1.1.2: 56 data bytes, press CTRL_C to break
Reply from 100.1.1.2: bytes=56 Sequence=1 ttl=255 time=31 ms
Reply from 100.1.1.2: bytes=56 Sequence=2 ttl=255 time=10 ms
Reply from 100.1.1.2: bytes=56 Sequence=3 ttl=255 time=5 ms
Reply from 100.1.1.2: bytes=56 Sequence=4 ttl=255 time=2 ms
Reply from 100.1.1.2: bytes=56 Sequence=5 ttl=255 time=28 ms
--- 100.1.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 2/15/31 ms
----End
Configuration Files
l Configuration file of CE1
#
sysname CE1
#
vlan batch 10
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 5 QinQ Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
235

Table of Contents

Other manuals for Huawei quidway s7700

Related product manuals