Huawei quidway s7700 - Page 275

#
return
l Configuration file of PE2
#
sysname PE2
#
vlan batch 30
#
mpls lsr-id 3.3.3.9
mpls
#
mpls l2vpn
mpls l2vpn default martini
#
mpls ldp
#
mpls ldp remote-peer 1.1.1.9
remote-ip 1.1.1.9
#
interface Vlanif 30
ip address 10.2.2.1 255.255.255.0
mpls
mpls ldp
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 30
port hybrid tagged vlan 30
#
interface GigabitEthernet2/0/0
#
interface GigabitEthernet2/0/0.1
control-vid 2000 qinq-termination
qinq termination pe-vid 200 ce-vid 10
mpls l2vc 1.1.1.9 101
#
interface LoopBack1
ip address 3.3.3.9 255.255.255.255
#
ospf 1
area 0.0.0.0
network 3.3.3.9 0.0.0.0
network 10.2.2.0 0.0.0.255
#
return
l Configuration file of Switch2
#
sysname Switch2
#
vlan batch 200
#
interface GigabitEthernet2/0/0
port hybrid tagged vlan 200
#
interface GigabitEthernet1/0/0
port hybrid untagged vlan 200
port vlan-stacking vlan 10 stack-vlan 200
#
return
l Configuration file of CE2
#
sysname CE2
#
vlan batch 10
#
interface Vlanif 10
ip address 100.1.1.2 255.255.255.0
#
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 5 QinQ Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
258