EasyManua.ls Logo

Huawei quidway s7700 - Page 326

Huawei quidway s7700
648 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PrefRcv
3.3.3.9 4 100 12 6 0 00:02:21 Established
0
[PE1] display bgp vpnv4 all peer
BGP local router ID : 1.1.1.9
Local AS number : 100
Total number of peers : 3 Peers in established state : 3
Peer V AS MsgRcvd MsgSent OutQ Up/Down State
PrefRcv
3.3.3.9 4 100 12 18 0 00:09:38 Established 0
Peer of vpn instance:
vpn instance vpna :
10.1.1.1 4 65410 25 25 0 00:17:57 Established 1
vpn instance vpnb :
10.2.1.1 4 65420 21 22 0 00:17:10 Established 1
Step 6 Verify the configuration.
Run the display ip routing-table vpn-instance command on a PE, and you can view the routes
to the remote CE.
Take the display on PE1 as an example:
[PE1] display ip routing-table vpn-instance vpna
Route Flags: R - relied, D - download to fib
------------------------------------------------------------------------------
Routing Tables: vpna
Destinations : 3 Routes : 3
Destination/Mask Proto Pre Cost Flags NextHop Interface
10.1.1.0/24 Direct 0 0 D 10.1.1.2 Vlanif10
10.1.1.2/32 Direct 0 0 D 127.0.0.1 InLoopBack0
10.1.1.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
10.3.1.0/24 BGP 255 0 RD 3.3.3.9 Vlanif30
[PE1] display ip routing-table vpn-instance vpnb
Route Flags: R - relied, D - download to fib
------------------------------------------------------------------------------
Routing Tables: vpnb
Destinations : 3 Routes : 3
Destination/Mask Proto Pre Cost Flags NextHop Interface
10.2.1.0/24 Direct 0 0 D 10.2.1.2 Vlanif20
10.2.1.2/32 Direct 0 0 D 127.0.0.1 InLoopBack0
10.2.1.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
10.4.1.0/24 BGP 255 0 RD 3.3.3.9 Vlanif30
The CEs in the same VPN can ping each other, but the CEs in different VPNs cannot ping each
other.
For example, CE1 can ping CE3 (10.3.1.1) but cannot ping CE4 (10.4.1.1).
[CE1] ping 10.3.1.1
PING 10.3.1.1: 56 data bytes, press CTRL_C to break
Reply from 10.3.1.1: bytes=56 Sequence=1 ttl=253 time=72 ms
Reply from 10.3.1.1: bytes=56 Sequence=2 ttl=253 time=34 ms
Reply from 10.3.1.1: bytes=56 Sequence=3 ttl=253 time=50 ms
Reply from 10.3.1.1: bytes=56 Sequence=4 ttl=253 time=50 ms
Reply from 10.3.1.1: bytes=56 Sequence=5 ttl=253 time=34 ms
--- 10.3.1.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 34/48/72 ms
[CE1] ping 10.4.1.1
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 5 QinQ Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
309

Table of Contents

Other manuals for Huawei quidway s7700

Related product manuals