Huawei quidway s7700 - Page 343

qinq termination pe-vid 100 ce-vid 10
ip binding vpn-instance vpna
ip address 10.3.1.2 255.255.255.0
arp broadcast enable
#
interface GigabitEthernet2/0/0
#
interface GigabitEthernet2/0/0.1
control-vid 2000 qinq-termination rt-protocol
qinq termination pe-vid 200 ce-vid 20
ip binding vpn-instance vpnb
ip address 10.4.1.2 255.255.255.0
arp broadcast enable
#
interface GigabitEthernet3/0/0
port hybrid pvid vlan 60
port hybrid untagged vlan 60
#
interface LoopBack1
ip address 3.3.3.9 255.255.255.255
#
bgp 100
peer 1.1.1.9 as-number 100
peer 1.1.1.9 connect-interface LoopBack1
#
ipv4-family unicast
undo synchronization
peer 1.1.1.9 enable
#
ipv4-family vpnv4
policy vpn-target
peer 1.1.1.9 enable
#
ipv4-family vpn-instance vpna
peer 10.3.1.1 as-number 65430
import-route direct
#
ipv4-family vpn-instance vpnb
peer 10.4.1.1 as-number 65440
import-route direct
#
ospf 1
area 0.0.0.0
network 172.2.1.0 0.0.0.255
network 3.3.3.9 0.0.0.0
#
return
l Configuration file of CE1
#
sysname CE1
#
vlan batch 10
#
interface Vlanif10
ip address 10.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 10
port hybrid tagged vlan 10
#
bgp 65410
peer 10.1.1.2 as-number 100
#
ipv4-family unicast
undo synchronization
import-route direct
peer 10.1.1.2 enable
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 5 QinQ Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
326