EasyManua.ls Logo

Huawei quidway s7700 - Page 487

Huawei quidway s7700
648 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
[PE2-mst-region] active region-configuration
[PE2-mst-region] quit
# Configure PE3.
[PE3] stp region-configuration
[PE3-mst-region] region-name RG1
[PE3-mst-region] active region-configuration
[PE3-mst-region] quit
# Configure CE2.
[CE2] stp region-configuration
[CE2-mst-region] region-name RG1
[CE2-mst-region] active region-configuration
[CE2-mst-region] quit
2. Configure the priorities of the PEs to make PE1 and PE2 the primary roots and PE3 and
PE4 the secondary roots.
# Configure PE1.
[PE1] stp instance 0 priority 0
# Configure PE2.
[PE2] stp instance 0 priority 0
# Configure PE3.
[PE3] stp instance 0 priority 4096
# Configure PE4.
[PE4] stp instance 0 priority 4096
3. Enable association between MSTP and VPLS on the CEs and PEs, and configure root
protection on the secondary roots.
# Configure CE1.
[CE1] stp enable
[CE1] interface gigabitethernet 1/0/1
[CE1-GigabitEthernet1/0/1] stp enable
[CE1-GigabitEthernet1/0/1] quit
[CE1] interface gigabitethernet 1/0/0
[CE1-GigabitEthernet1/0/0] stp enable
[CE1-GigabitEthernet1/0/0] quit
# Configure CE2.
[CE2] stp enable
[CE2] interface gigabitethernet 1/0/1
[CE2-GigabitEthernet1/0/1] stp enable
[CE2-GigabitEthernet1/0/1] quit
[CE2] interface gigabitethernet 1/0/0
[CE2-GigabitEthernet1/0/0] stp enable
[CE2-GigabitEthernet1/0/0] quit
# Configure PE1.
[PE1] stp enable
[PE1] interface gigabitethernet 1/0/0
[PE1-GigabitEthernet1/0/0] stp vpls-subinterface enable
[PE1-GigabitEthernet1/0/0] stp enable
[PE1-GigabitEthernet1/0/0] quit
[PE1] interface gigabitethernet 2/0/0
[PE1-GigabitEthernet2/0/0] stp disable
[PE1-GigabitEthernet2/0/0] quit
[PE1] interface gigabitethernet 3/0/0
[PE1-GigabitEthernet3/0/0] stp disable
[PE1-GigabitEthernet3/0/0] quit
# Configure PE2.
[PE2] stp enable
[PE2] interface gigabitethernet 1/0/0
[PE2-GigabitEthernet1/0/0] stp vpls-subinterface enable
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 9 MSTP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
470

Table of Contents

Other manuals for Huawei quidway s7700

Related product manuals