Huawei quidway s7700 - Page 576

port trunk allow-pass vlan 100
#
return
l Configuration file of PE1
#
sysname PE1
#
vlan batch 5 to 6 100
#
rrpp enable
#
stp region-configuration
instance 1 vlan 5 to 6 100
active region-configuration
#
rrpp domain 1
control-vlan 5
protected-vlan reference-instance 1
ring 1 node-mode master primary-port GigabitEthernet 1/0/2 secondary-port
GigabitEthernet 1/0/3 level 0
ring 1 enable
#
sep segment 1
control-vlan 10
block port middle
tc-notify rrpp
protected-instance 0 to 48
#
interface GigabitEthernet1/0/1
port link-type trunk
port trunk allow-pass vlan 100
stp disable
sep segment 1 edge primary
#
interface GigabitEthernet1/0/2
port link-type trunk
port trunk allow-pass vlan 5 to 6 100
stp disable
#
interface GigabitEthernet1/0/3
port link-type trunk
port trunk allow-pass vlan 5 to 6 100
stp disable
#
return
l Configuration file of PE2
#
sysname PE2
#
vlan batch 5 to 6 100
#
rrpp enable
#
stp region-configuration
instance 1 vlan 5 to 6 100
active region-configuration
#
rrpp domain 1
control-vlan 5
protected-vlan reference-instance 1
ring 1 node-mode transit primary-port GigabitEthernet 1/0/2 secondary-port
GigabitEthernet 1/0/3 level 0
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 10 SEP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
559