EasyManua.ls Logo

Huawei quidway s7700 - Page 583

Huawei quidway s7700
648 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The configuration details are not provided here. For details, see configuration files in this
example.
Step 6 Verify the configuration.
Simulate a fault, and then check whether the status of the blocked interface changes from blocked
to forwarding.
Run the shutdown command on GE 1/0/1 of LSW2 to simulate an interface fault.
Run the display sep interface command on LSW3 to check whether the status of GE1/0/1 in
SEP segment 1 changes from blocked to forwarding.
[LSW3] display sep interface gigabitethernet 1/0/1
SEP segment 1
----------------------------------------------------------------
Interface Port Role Neighbor Status Port Status
----------------------------------------------------------------
GE1/0/1 common up forwarding
SEP segment 2
----------------------------------------------------------------
Interface Port Role Neighbor Status Port Status
----------------------------------------------------------------
GE1/0/1 common up forwarding
The preceding command output shows that the status of GE 1/0/1 changes from blocked to
forwarding and the forwarding path change in SEP segment 1 does not affect the forwarding
path in SEP segment 2.
----End
Configuration Files
l Configuration file of LSW1
#
sysname LSW1
#
vlan batch 10 100 to 500
#
stp region-configuration
instance 1 vlan 100 to 300
instance 2 vlan 301 to 500
active region-configuration
#
sep segment 1
control-vlan 10
block port sysname LSW3 interface GigabitEthernet1/0/1
preempt delay 15
protected-instance 1
sep segment 2
control-vlan 10
block port sysname LSW2 interface GigabitEthernet1/0/1
preempt delay 15
protected-instance 2
#
interface GigabitEthernet1/0/1
port hybrid tagged vlan vlan 10 100 to 500
stp disable
sep segment 1 edge primary
sep segment 2 edge primary
#
interface GigabitEthernet1/0/3
port hybrid tagged vlan 10 100 to 500
stp disable
sep segment 1 edge secondary
sep segment 2 edge secondary
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 10 SEP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
566

Table of Contents

Other manuals for Huawei quidway s7700

Related product manuals