Huawei quidway s7700 - Page 608

[CE1] vlan 100
[CE1-vlan100] quit
[CE1] stp enable
[CE1] interface gigabitethernet 1/0/0
[CE1-GigabitEthernet1/0/0] port hybrid pvid vlan 100
[CE1-GigabitEthernet1/0/0] port hybrid untagged vlan 100
# Configure CE2.
<Quidway> system-view
[Quidway] sysname CE2
[CE2] vlan 100
[CE2-vlan100] quit
[CE2] stp enable
[CE2] interface gigabitethernet 1/0/0
[CE2-GigabitEthernet1/0/0] port hybrid pvid vlan 100
[CE2-GigabitEthernet1/0/0] port hybrid untagged vlan 100
# Configure CE3.
<Quidway> system-view
[Quidway] sysname CE3
[CE3] vlan 200
[CE3-vlan200] quit
[CE3] stp enable
[CE3] interface gigabitethernet 1/0/0
[CE3-GigabitEthernet1/0/0] port hybrid pvid vlan 200
[CE3-GigabitEthernet1/0/0] port hybrid untagged vlan 200
# Configure CE4.
<Quidway> system-view
[Quidway] sysname CE4
[CE4] vlan 200
[CE4-vlan200] quit
[CE4] stp enable
[CE4] interface gigabitethernet 1/0/0
[CE4-GigabitEthernet1/0/0] port hybrid pvid vlan 200
[CE4-GigabitEthernet1/0/0] port hybrid untagged vlan 200
# Configure PE1.
<Quidway> system-view
[Quidway] sysname PE1
[PE1]
# Configure PE2.
<Quidway> system-view
[Quidway] sysname PE2
[PE2]
Step 2 On PE1 and PE2, add GE 1/0/0 to VLAN 100, add GE 1/0/1 to VLAN 200, and enable Layer 2
protocol transparent transmission.
# Configure PE1.
[PE1] vlan 100
[PE1-vlan100] quit
[PE1] interface GigabitEthernet 1/0/0
[PE1-GigabitEthernet1/0/0] port hybrid pvid vlan 100
[PE1-GigabitEthernet1/0/0] port hybrid untagged vlan 100
[PE1-GigabitEthernet1/0/0] l2protocol-tunnel stp enable
[PE1-GigabitEthernet1/0/0] quit
[PE1] vlan 200
[PE1-vlan200] quit
[PE1] interface GigabitEthernet 1/0/1
[PE1-GigabitEthernet1/0/1] port hybrid pvid vlan 200
[PE1-GigabitEthernet1/0/1] port hybrid untagged vlan 200
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 11 Layer 2 Protocol Transparent Transmission Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
591