Huawei quidway s7700 - Page 615

[CE3] interface gigabitethernet 1/0/0
[CE3-GigabitEthernet1/0/0] port hybrid tagged vlan 200
[CE3-GigabitEthernet1/0/0] stp bpdu vlan 200
# Configure CE4.
[CE4] vlan 200
[CE4-vlan200] quit
[CE4] interface gigabitethernet 1/0/0
[CE4-GigabitEthernet1/0/0] port hybrid tagged vlan 200
[CE4-GigabitEthernet1/0/0] stp bpdu vlan 200
Step 3 Configure PE interfaces to transparently transmit STP packets of CEs to the P device.
# Configure PE1.
[PE1] vlan 100
[PE1-vlan100] quit
[PE1] vlan 200
[PE1-vlan200] quit
[PE1] interface gigabitethernet 1/0/0
[PE1-GigabitEthernet1/0/0] port hybrid tagged vlan 100 200
[PE1-GigabitEthernet1/0/0] quit
[PE1] interface gigabitethernet 1/0/1
[PE1-GigabitEthernet1/0/1] port hybrid tagged vlan 100
[PE1-GigabitEthernet1/0/1] l2protocol-tunnel stp vlan 100
[PE1-GigabitEthernet1/0/1] quit
[PE1] interface gigabitethernet 1/0/2
[PE1-GigabitEthernet1/0/2] port hybrid tagged vlan 200
[PE1-GigabitEthernet1/0/2] l2protocol-tunnel stp vlan 200
[PE1-GigabitEthernet1/0/2] quit
# Configure PE2.
[PE2] vlan 100
[PE2-vlan100] quit
[PE2] vlan 200
[PE2-vlan200] quit
[PE2] interface gigabitethernet 1/0/0
[PE2-GigabitEthernet1/0/0] port hybrid tagged vlan 100 200
[PE2-GigabitEthernet1/0/0] quit
[PE2] interface gigabitethernet 1/0/1
[PE2-GigabitEthernet1/0/1] port hybrid tagged vlan 100
[PE2-GigabitEthernet1/0/1] l2protocol-tunnel stp vlan 100
[PE2-GigabitEthernet1/0/1] quit
[PE2] interface gigabitethernet 1/0/2
[PE2-GigabitEthernet1/0/2] port hybrid tagged vlan 200
[PE2-GigabitEthernet1/0/2] l2protocol-tunnel stp vlan 200
[PE2-GigabitEthernet1/0/2] quit
Step 4 Configure PEs to replace the destination MAC address of STP packets received from CEs.
# Configure PE1.
[PE1] l2protocol-tunnel stp group-mac 0100-5e00-0011
# Configure PE2.
[PE2] l2protocol-tunnel stp group-mac 0100-5e00-0011
Step 5 Configure the Layer 2 forwarding function on the P device and configure it to allow packets of
VLAN 100 and VLAN 200 to pass.
[P] vlan 100
[P-vlan100] quit
[P] vlan 200
[P-vlan200] quit
[P] interface gigabitethernet 1/0/0
[P-GigabitEthernet1/0/0] port hybrid tagged vlan 100 200
[P-GigabitEthernet1/0/0] quit
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 11 Layer 2 Protocol Transparent Transmission Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
598