Network Topology Supported by HVRP
Figure 12-2 Networking diagram of a single-ring network supported by HVRP
ME60
SwitchA
SwitchB
SwitchC
SwitchD
SwitchE
The single-ring network supported by HVRP has the following characteristics:
l STP is enabled on the entire network.
l SwitchA is the root bridge and other Switches connect to the Layer 3 device through
SwitchA.
l The link between SwitchD and SwitchE is blocked by STP.
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 12 HVRP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
614
To Next Page
Loading...
