81
The cursor moves to operation 1. Set 50% of the
maximum PTP acceleration.
Enter 50 and press the return key.
To reattempt input:
Move the cursor to the change location with the
or return key.
Overwrite the data or delete it with the BS key.
Or, reattempt from the step No. with the ESC key.
Press the WRT key to transfer the data key to the
controller. The step No. advances to 2.
* When the screen is changed with the PAGE UP
and PAGE DOWN keys or ESC key before data
transfer, the input data becomes invalid.
Press
of the 10 key, the SF key or key to
search DCLS.
Select the F3 (DCLS) key.
Press the return key.
To Next Page
Loading...
