IAI SEL User Manual

16. Controller
264
R F l s - P r o 9
S E L P r o 9 r a m
w i l l b e r e c o v e r d ?
Y e s N o
R F l s - P r o 9
C o m p l e t e !
F1
R F l s
P r o 9 S y m P o s i →
R F l s
P a r a
SF
16.16. Flash ROM writing data recovery (one generation before)
For TTA, the ash ROM writing data can be recovered to the writing data of one generation
before.
Press F3 key (RFls) in the controller window.
Mode Transfer: Ctl - RFls
To recover the program data, press F2
(Pro9).
To recover the symbol data, press F3
(Sym).
To recover the position data, press F4
(Posi).
To recover the position data, press F1
(Para).
(1) Recovery of Program
To have a recovery, press F1
(Yes).
To cancel the operation, press F2
(No).
If the recovery process is nished, the display changes
to the screen shown on the left.
Return to the previous screen with the ESC
key.

IAI SEL Specifications

General

Protection Class	IP20
Communication	RS-232C
Control Method	PTP
Number of Axes	Up to 4 axes
Vibration Resistance	4.9 m/s² (0.5 G)
Humidity	20 to 85% RH (non-condensing)