IAI SEL User Manual

16. Controller
218
201
18.2. Flash ROM Writing
After clearing the data from Flash ROM, write data which is saved in controller memory to Flash
ROM.
Select the F1(Flsh) key on the controller item screen.
Mode Transition:
To write the data to Flash ROM, press the F1 (Yes)
key.
If not, press the F2 (No) key. The screen returns to
the controller item screen.
During Flash ROM writing, “Please Wait....” blinks.
* Never shut off the power to the controller
during Flash ROM writing.
Return to the controller item screen with the ESC
key.
16.2.

IAI SEL Specifications

General

Protection Class	IP20
Communication	RS-232C
Control Method	PTP
Number of Axes	Up to 4 axes
Vibration Resistance	4.9 m/s² (0.5 G)
Humidity	20 to 85% RH (non-condensing)