IAI SEL User Manual

16. Controller
222
205
18.9. Driver Power Recovery Request
Requests to recover driver power to the controller.
Select the F3 (RPwrl) key on the controller item screen.
Mode Transition:
To execute driver power recovery request, press the
F1 (Yes) key. Return to the previous screen.
If not, press the F2 (No) key. Return to the previous
screen.
18.10. Action Pause Release Request
Request to release action pause to the controller.
Select the F4 (RAct) key on the controller item screen.
Mode Transition:
To execute a action pause release request, press
the F1 (Yes) key. Return to the previous screen.
If not, press the F2 (No) key. Return to the previous
screen.
16.9.
16.10.

IAI SEL Specifications

General

Protection Class	IP20
Communication	RS-232C
Control Method	PTP
Number of Axes	Up to 4 axes
Vibration Resistance	4.9 m/s² (0.5 G)
Humidity	20 to 85% RH (non-condensing)