IBM V7000 User Manual

178 IBM Flex System V7000 Storage Node Introduction and Implementation Guide
Verify in the Summary that all hardware has been detected by the system correctly, and
click Next as shown in Figure 4-27.
Figure 4-27 Summary of non-automatically configure storage
8. After you have set up your system, configure settings for each host that is connected to
the system. Click Create Hosts to continue as shown in Figure 4-28.
Figure 4-28 Create Hosts

IBM V7000 Specifications

General

Model	IBM Storwize V7000
Storage Type	Hybrid Flash Array
Maximum Capacity	1.2PB
RAID Levels	0, 1, 5, 6, 10
Connectivity	8 Gbps Fibre Channel, 16 Gbps Fibre Channel, 1 Gbps iSCSI, 10 Gbps iSCSI
Management	Command-line interface (CLI), Graphical user interface (GUI)
Form Factor	2U
Drive Bays	12
Maximum Raw Capacity	1.2PB
Operating System Support	AIX, HP-UX, Linux, VMware, Windows
Data Reduction Features	Real-time Compression, Deduplication
Drive Types	SSD, HDD
Scalability	Scale-up (drive enclosures) and scale-out (clustering) capabilities