Icom IC-E92D - Page 115

107
12
MENU SCREEN OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D Break-in function
The break-in function allows you to break into a conversation
where the two original stations are communicating with call
sign squelch enabled.
• OFF : The break-in function is set to OFF.
(default)
• ON : The break-in function is set to ON.
• “BK” appears on the display.
D EMR function
The EMR communication mode is available for digital mode
operation. In the EMR communication mode, no call sign
setting is necessary. When an EMR communication mode
signal is received, the audio (voice) will be heard at the
specified level even the volume setting level is set to mini-
mum level, or digital call sign/digital code squelch is in use.
• OFF : The EMR function is set to OFF.
(default)
• ON : The EMR function is set to ON.
• “EMR” appears on the display.
ON
ON
OFF
OFF
EMR
EMR
r
ON
ON
OFF
OFF
EMR
EMR
r
NOTE: The EMR communication function is turned OFF
automatically when turning transceiver’s power OFF
NOTE: The break-in function is turned OFF automatically
when turning transceiver’s power OFF
ON
ON
OFF
OFF
BK
BK
r
ON
ON
OFF
OFF
BK
BK
r