75
9
MEMORY/CALL CHANNELS
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■ Memory bank setting
The IC-E92D has a total of 26 banks (A to Z). Regular mem-
ory channels, 000 to 799 (A band) / 000 to 399 (B band), are
assigned to the desired bank for easy memory management.
q Push and hold [S.MW](MR) for 1 sec. to enter select
memory write mode.
• 1 short and 1 long beep sound.
• Memory channel number blinks.
w Rotate [DIAL] to select the desired memory channel.
e Push [
](2) or [ ](8) to select “BANK.”
• Bank group and channel number is displayed if the selected
memory channel has already been previously assigned to a
bank.
r Push [ ](4) or [ ](6) to select the desired bank group (A–
Z) or bank channel (0–99) digit.
t Rotate [DIAL] to select the bank group (from “A” to “Z”) or
bank channel number (from “00” to “99”).
y Push and hold [S.MW](MR) for 1 sec. to assign the chan-
nel to the bank.
• Return to the previous indication.
14
870
BANK
:----
MNAME:
SKIP
:OFF
FM
r
011
14
870
BANK
:----
MNAME:
SKIP
:OFF
r
011
Push or
[DIAL]
MR
S.MW
B
2
SCAN
8
TS
2
SCAN
8
TS
14
870
BANK
:C-00
MNAME:
SKIP
:OFF
r
011
Bank group is selected
with [DIAL].
[DIAL]
4
DUP
6
M.NAME
14
870
BANK
:C-05
MNAME:
SKIP
:OFF
r
011
Bank channel is
selected with [DIAL].
To Next Page
Loading...
