65
8
GPS/GPS-A OPERATION
New2001
7
D GPS data addition
q Enter “GPS MEMORY” in message/position set mode.
• GPS MEMORY screen is displayed.
w Rotate [DIAL]
†
to select the desired memory bank or ALL,
then push [
](6).
e Rotate [DIAL]
†
to select
<ADDITION>, then push
[
](5).
r Rotate [DIAL]
†
to select desired items (NAME, TIME,
LATITUDE, LONGITUDE, BANK or BANK NAME), then
push [ ](6) to edit the selected item.
t Rotate [DIAL]
†
to select the desired character or symbol.
y Push [
](6) to select 2nd digit, then rotate [DIAL]
†
to se-
lect the desired character or code.
• Push [ ](6) to move the cursor right; push [ ](4) to move the
cursor left.
• 2nd digit blinks (1st digit stops blinking).
u Repeat the steps r and t to enter the desired message.
• Up to 8-character messages can be set.
i Push [ ](5) to add the GPS data.
o Push [MENU/
] to return to frequency indication.
1
2
3
4
5
6
8
9
10
11
12
13
14
15
16
17
18
19
†
[DIAL] ↔ [ ](2)/[ ](8)
‡
[ ](5) ↔ [ ](6)
❮MENU screen❯ ➪ ❮MESSAGE/POSITION❯ ➪ ❮GPS MEMORY❯
(Push [MENU/ ]) (Rotate [DIAL]
†
, then push [ ](5)
‡
.)
RX
ALL
A:
:SET
:BACK
:SEL
:EDIT
:ALM
GPS MEMORY
r
<ADDITION>
:SET
:BACK
BANK A
r
NAME:
:SET
:BACK
<ADDITION>
r
:SEL
:EDIT
NAME:
:SET
:BACK
<ADDITION>
r
:SEL
:EDIT
AB
To Next Page
Loading...
