Icom IC-E92D - TV Channel Operation

28
5
BASIC OPERATION
New2001
■ TV channel operation
TV channel operation is available only when TV channels
are programmed using the optional RS-92.
(p. 135) Also
available for A band operation only.
D TV channel receiving
q Push [CALL] several times to select TV channels.
• “ TV” and channel number appear.
w Rotate [DIAL] to select the desired channel.
• While pushing and holding [BAND], rotating [DIAL] selects the
all channels including skip channel.
D Skip channel setting
Unwanted channels can be skipped for rapid selection, etc.
q Push [CALL] several times to select TV channels.
• “TV” and channel number appear.
w Rotate [DIAL] to select the channel to be skipped.
• To clear the skip setting, rotate [DIAL] while pushing and hold-
ing [BAND] to select a skip channel.
e Push and hold [SKIP](5) for 1 sec. to toggle the skip set-
ting ON and OFF.
• “SKIP” appears when the channel is set as skip channel.
D Automatic TV channel programming
TV channels can be programmed automatically.
q Push [CALL] several times
to select TV channels.
• “ TV” and channel number ap-
pear.
w Push [SCAN](2) to start TV
channel programming.
• The programming will automatically stop after scanning all
channels.
[DIAL]
CALL
RX CS
C
TV
TV
A
MemoName
MemoName
µ
PRIO
PRIO
WX
WX
EMR
EMR
DTCS
DTCS
WFM
WFM
LOW
LOW
ATT
ATT
P
SKIP
SKIP
+DUP
+DUP
25
25
10
TV mode indication
Channel indication
[DIAL]
BAND
D
5
SKIP
CALL
RX CS
C
TV
TV
A
MemoName
MemoName
µ
PRIO
PRIO
WX
WX
EMR
EMR
DTCS
DTCS
WFM
WFM
LOW
LOW
ATT
ATT
P
SKIP
SKIP
+DUP
+DUP
25
25
12
Appears
TV
TV
A
MemoName
MemoName
µ
PRIO
PRIO
WX
WX
EMR
EMR
DTCS
DTCS
WFM
WFM
LOW
LOW
ATT
ATT
P
SKIP
SKIP
+DUP
+DUP
25
25
2
New