Icom IC-E92D - Priority Watch Operation

■ Priority watch operation
D Memory/call channel and memory scan watch
q Select VFO mode; then, set an operating frequency.
w Select the channel(s) to be watched.
For memory channel watch:
Select the desired memory channel.
For call channel watch:
Select the desired call channel.
For memory scan watch:
Select memory mode, or the desired bank group; then,
push and hold [SCAN](2) for 1 sec. to start memory/bank
scan.
e Enter “PRIO WATCH” in scan set mode.
(p. 108)
r Rotate [DIAL]
†
to select “ON.”
• Select “BELL” if the priority beep function is desired.
t Push [MENU/ ] to exit scan set mode and start the
watch.
• “PRIO” indicator appears.
• The transceiver checks the memory/bank channel(s) or call
channel every 5 sec.
• The watch resumes according to the selected scan resume
condition. (p. 89)
y Push [VFO] to cancel the watch.
New2001
91
11
PRIORITY WATCH
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Although [DIAL] and [ ](5) are used for description in this
section, [
](2)/[ ](8) and [ ](6) are available instead of
[DIAL] and [
](5).
❮MENU screen❯ ➪ ❮SCAN❯ ➪ ❮PRIO WATCH❯
(Push [MENU/ ]) (Rotate [DIAL]
†
, then push [ ](5)
‡
.)
• During priority watch
Monitors VFO frequency
for 5 sec.
Pauses on a memory or
call channel when a
signal is received.
• During priority watch with priority beep
Emits beep and blinks “S” indicator when a signal is
received on a memory or call channel.
PRIO
PRIO
FM
FM
A
14
145
180
180
µ
035
035
PRIO
PRIO
FM
FM
A
43
433
260
260
PSKI
PSKIP
PRIO
PRIO
FM
FM
A
14
145
180
180
µ
035
035
PRIO
PRIO
FM
FM
A
43
433
260
260
PSKI
PSKIP
†
[DIAL] ↔ [ ](2)/[ ](8)
‡
[ ](5) ↔ [ ](6)