87
10
SCAN OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■ Skip channel/frequency setting
Memory channels can be set to be skipped during memory
skip scan. In addition, memory channels can be set to be
skipped during both memory skip scan and frequency skip
scan. This is useful to speed up the scan rate.
q Select a memory channel:
➥ Push [MR] to select memory mode.
➥ Rotate [DIAL] to select the desired channel to be a
skip channel/frequency.
w Push and hold [S.MW](MR) for 1 sec. to enter select
memory write mode.
e Push [∫](2) or [√](8) several times to select “SKIP.”
r Rotate [DIAL] to select the skip condition from “SKIP,”
“PSKIP” or “OFF” for the selected channel.
• PSKIP : The channel is skipped during memory/bank scan and
the programmed frequency is skipped during VFO
scan, such as programmed scan.
• SKIP : The channel is skipped during memory or bank scan.
• OFF : The channel is scanned during any scan.
(Continue to the next page.)
FM
020
14
870
[DIAL]
MR
S.MW
B
14
000
BANK
:----
MNAME:
SKIP
:OFF
FM
r
012
14
000
MNAME:
SKIP
:OFF
CLEAR
FM
r
012
or
several times.
Push
MR
S.MW
B
2
SCAN
8
TS
2
SCAN
8
TS
To Next Page
Loading...
Need help?
General
