71
9
MEMORY/CALL CHANNELS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
New2001
■ General description
The IC-E92D has 850 memory channels in the A band, 450
memory channels in the B band, and 2 call channels in each
band. Memory channels in each band include 50 scan edge
memory channels
(25 pairs) for storage of often-used fre-
quencies, respectively.
And a total of 26 memory banks, A to Z, are available in
each band for storing groups of frequencies, etc. Up to 100
channels can be assigned into a bank.
D Memory channel contents
The following information can be programmed into memory
channels:
• Operating frequency
(p. 18)
• Operating mode (p. 21)
• Duplex direction (+DUP or –DUP) with an offset fre-
quency
(p. 32)
• Subaudible tone encoder (p. 121), tone squelch or
DTCS squelch ON/OFF
(p. 124)
• Subaudible tone frequency (p. 121), tone squelch fre-
quency or DTCS code with polarity (pgs. 121, 125)
• Scan skip information (p. 87)
• Memory bank (p. 75)
• Memory name (p. 77)
• Tuning step (p. 18)
• Call sign squelch or Digital code squelch* (p. 124)
• Station call sign* (p. 36)
• RPT1/RPT2 call sign* (p. 41)
*Available for B band operation only.
CAUTION!
Memory data can be erased by static electricity, electric
transients, etc.
In addition, they can be erased by malfunction and during
repairs.
Therefore, we recommend that memory data be written
down or be saved to a PC using the optional RS-92
RE-
MOTE CONTROL SOFTWARE.
To Next Page
Loading...
Need help?
General
