39
7
DV MODE OPERATION
New2001
7
D When calling the desired station
Continued instruction from step x on page 38.
c Rotate [DIAL]
†
to select “UR,” then push [ ](5)
†
.
• YOUR CALL SIGN screen is displayed.
v Rotate [DIAL]
†
to select the call sign channel in which the
desired station’s call sign is programmed.
• See page 36 for station call sign programming details.
b Push [ ](5) to set the station’s call sign and return to
CALL SIGN screen.
n Push [MENU/
] to return to frequency indication.
m Perform the instruction steps t and y on page 38.
D When sending a CQ
Continued instruction from step x on page 38.
c Rotate [DIAL]
†
to select “UR,” then push [ ](5)
†
.
• YOUR CALL SIGN screen is displayed.
v Rotate [DIAL]
†
to select the call sign channel in which
“CQCQCQ” is programmed.
Or, select “U” then push [
](6) and [CQ](0) in sequence
to set “CQCQCQ.”
b Push [ ](5) to set “CQCQCQ” as the call sign and return
to CALL SIGN screen.
n Push [MENU/
to return to frequency indication.
m Perform the instruction step t and y on page 38.
†
[DIAL] ↔ [ ](2)/[ ](8)
‡
[ ](5) ↔ [ ](6)
1
2
3
4
5
6
8
9
10
11
12
13
14
15
16
17
18
19
UR:STATION1
R1:
R2:NOT USE*
MY:MYCALL
/IC92
CALL SIGN
r
UR:CQCQCQ
R1:
R2:NOT USE*
MY:MYCALL
/IC92
CALL SIGN
r
To Next Page
Loading...
