Icom IC-E92D - Automatic Reply Function; Rx Message Indication

New
54
7
DV MODE OPERATION
New2001
D RX message indication
The received message can also be checked in message/po-
sition set mode.
q Select “RX MESSAGE” in message/position set mode.
• The received message is displayed in RX MESSAGE screen.
w Rotate [DIAL] or push [ ](8) to display the station call
sign.
e Push [
](5) or [ ](4) to return to MESSAGE/POSITION
screen.
r Push [MENU/
] to return to frequency indication.
■ Automatic reply function
The automatic reply function replies to calls by a station that
specifi ed your call sign.
Two methods of replying are available— one is making a
reply call with your own call sign, and other one is making
a reply call with reply voice audio that has been recorded in
DV voice memory.
D Automatic reply function setting
q Enter “AUTO REPLY” in DV set mode. (p. 100)
• AUTO REPLY screen is displayed.
w Rotate [DIAL]
†
to select the desired reply condition.
OFF : Deactivate the automatic reply function.
(default)
ON : Reply to the call with your own call sign.
VOICE :
Reply to the my call sign, etc with the recorded
voice memory automatically.
e Push [ ](5).
• Returns to DV SET MODE screen automatically.
r Push [MENU/ ] to return to frequency indication.
❮MENU screen❯ ➪ ❮MESSAGE/POSITION❯ ➪ ❮RX MESSAGE❯
(Push [MENU/ ]) (Rotate [DIAL]
†
, then push [ ](5)
‡
.)
MESSAGE:MESSAGE:
Hello!Hello!
:CALLER:CALLER
:BACK:BACK
RX MESSAGERX MESSAGE
r
CALLER:CALLER:
BBBBBB BBBBBB
/ /
:MSG:MSG
:BACK:BACK
RX MESSAGERX MESSAGE
r
❮MENU screen❯ ➪ ❮DV SET MODE❯ ➪ ❮AUTO REPLY❯
(Push [MENU/ ]) (Rotate [DIAL]
†
, then push [ ](5)
‡
.)
OFF
OFF
ON
ON
VOICE
VOICE
AUTO REPLY
AUTO REPLY
r