Icom IC-E92D - Confi Rming a DTMF Memory; Setting DTMF Transfer Speed

New
120
13
OTHER FUNCTIONS
New2001
■ Confi rming a DTMF memory
A DTMF memory can be confi rmed with a DTMF tone.
q Push and hold [DTMF.M](9) for 1 sec. to enter DTMF
memory mode.
w Rotate [DIAL]
†
to select the desired DTMF memory chan-
nel.
e Push [SQL] to confi rm the DTMF memory contents.
r Push [VFO](A) to exit DTMF memory.
■ Setting DTMF transfer speed
The DTMF transfer speed can be selected.
q Enter “DTMF SPEED” in DUP/TONE… set mode.
(p. 111)
w Rotate [DIAL]
†
to select DTMF transfer speed as below.
100: Transfer the DTMF tones at about 100 msec. per
tone.
200: Transfer the DTMF tones at about 200 msec. per
tone.
300: Transfer the DTMF tones at about 300 msec. per
tone.
500: Transfer the DTMF tones at about 500 msec. per
tone.
e Push [
](5) (or [ ](4)) to return to DUP/TONE… set
mode, and push [MENU/
] to return to frequency indi-
cation.
❮MENU screen❯ ➪ ❮DUP/TONE...❯ ➪ ❮DTMF SPEED❯
(Push [MENU/ ]) (Rotate [DIAL]
†
, then push [ ](5)
‡
.)
DV SET MODE
SCAN
r
DUP/TONE...
***** MENU *****
r
100100
200200
500500
300300
DTMF SPEEDDTMF SPEED
Push [SQL], then sounds DTMF
codes.
Ch01Ch01
01234567 01234567
89ABC*#0 89ABC*#0
:SET:SET
:BACK:BACK
:SEL:SEL
:EDIT:EDIT
DTMF MEMORYDTMF MEMORY
r
[SQL]
[DIAL]
9
DTMF . M
CS
Ch01
01234567
89AB
:SET
:BACK
:SEL
:EDIT
DTMF MEMORY
Ch01
:SET
:BACK
:SEL
:EDIT
DTMF MEMORY