109
12
MENU SCREEN OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D Memory bank link function
Sets the memory bank link function ON (default) and OFF.
The link function provides continuous bank scan, scanning
all contents in the selected banks during bank scan.
• Bank link setting
q Rotate [DIAL]
†
to select the bank that you want to
change.
w Push [
](5)
‡
to enter bank setting.
e Rotate [DIAL]
†
to select the setting.
r Push [
](5) to set and return to the BANK LINK screen.
t Rotate [DIAL]
†
to select next bank and repeat steps w to
r, or push [MENU/
] to exit scan set mode.
D Program scan link function
Sets the program scan link function ON (default; P-01–P24)
and OFF
(default; P-00). The link function provides continuous
program scan in the selected program scan number during
program scan.
• Program scan link setting
q Rotate [DIAL]
†
to select the program scan number that
you want to change.
w Push [
](5)
‡
to enter program scan setting.
e Rotate [DIAL]
†
to select the setting.
r
Push [ ](5) to set and return to the PSCAN LINK screen.
t Rotate [DIAL]
†
to select next program scan and repeat
steps w to r, or push [MENU/
] to exit MENU screen
operation.
BANK-A:ON
BANK-D:ON
BANK-C:ON
BANK-B:ON
BANK-E:ON
BANK LINK
r
BANK-V:ON
BANK-Y:ON
BANK-X:ON
BANK-W:ON
BANK-Z:ON
BANK LINK
\
r
ON
OFF
BANK-A
r
ON
OFF
BANK-A
r
†
[DIAL] ↔ [ ](2)/[ ](8)
‡
[ ](5) ↔ [ ](6)
P-00:OFF
P-03:ON
P-02:ON
P-01:ON
P-04:ON
PSCAN LINK
r
P-01:ON
P-04:ON
P-03:ON
P-02:ON
P-05:ON
PSCAN LINK
\
r
ON
OFF
PSCAN-00
r
ON
OFF
PSCAN-00
r
To Next Page
Loading...
