130
13
OTHER FUNCTIONS
New2001
■ Cloning function
The IC-E92D has transceiver-to-transceiver data cloning
capability. This function is useful when you want to copy all
of the programmed contents from one IC-E92D to another.
• An optional OPC-474
CLONING CABLE and OPC-1797 CON-
NECTION CABLE are required.
q Turn the transceiver’s power OFF, then connect an op-
tional OPC-474 and OPC-1797 between both [SP] jacks.
w While pushing [MR] and [MENU/
], push and hold
[PWR] for 1 sec. to enter cloning mode.
• “CLONE M” appears.
e Push [PTT] on the “master” transceiver.
• “CLONE OUT M” appears and the bar meter shows that cloning
is taking place.
• After the cloning is completed, the display returns to “CLONE
END.”
r Push and hold [PWR] for 1 sec. to turn power OFF.
The optional RS-92
REMOTE CONTROL SOFTWARE is also
available to clone/edit contents with a PC (for Microsoft
®
Windows
®
98/98SE/ME/2000/XP/Windows Vista
TM
) and
using ICF format fi les.
OPC-474 (optional)
OPC-1797 (optional)
to [DATA/SP/MIC]
to [SP] to [SP]
New
To Next Page
Loading...
