Icom IC-E92D - Erasing;Transferring Bank Contents

81
9
MEMORY/CALL CHANNELS
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■ Erasing/transferring bank contents
The bank contents of programmed memory channels can be
cleared or reassigned to another memory bank.
INFORMATION: Even if the memory bank contents are
cleared, the memory channel contents still remain pro-
grammed.
q Select the desired bank contents to be transferred or
erased from the bank.
(p. 76)
➥ Push [MR] several times to select memory bank mode.
➥ While pushing [BAND], rotate [DIAL] to select the de-
sired memory bank group.
• Pushing [BAND] also can be select the band.
➥ Rotate [DIAL] to select the bank channel.
w Push [S.MW](MR) for 1 sec. to enter select memory write
mode.
• 1 short and 1 long beeps sound.
• Displays the original memory channel number automatically
and memory channel number blinks.
• Do not hold [S.MW](MR) for more than 2 sec., otherwise the
memory contents will be copied to VFO.
e Push [ ](2) or [ ](8) several times to select “BANK.”
r Push [
](4) or [ ](6) to select the desired bank group or
bank channel to be transferred.
t Rotate [DIAL] to select the desired bank group or channel.
• Select “– – – –” indication when erasing the contents from the
bank.
y Push [S.MW](MR) for 1 sec. to erase/transfer the bank
contents.
[DIAL]
MR
S.MW
B
BAND
D
A
µ
FM
FM
43
433
000
000
C05
C05
14
145
600
600
BANK
BANK
:----
:----
BNAME:
BNAME:
MNAME:
MNAME:
SKIP
SKIP
:OFF
:OFF
FM
FM
r
µ
025
025
14
145
600
600
BANK
BANK
:B-11
:B-11
BNAME:
BNAME:
MNAME:
MNAME:
SKIP
SKIP
:OFF
:OFF
FM
FM
r
µ
025
025
To transfer the bank contents
to ch 11 in Bank B.
To erase
Bank channel is
displayed.
is displayed.
[DIAL]
MR
S.MW
B
2
SCAN
8
TS
4
DUP
6
M.NAME